Material properties
| Max. permitted static load (p) | N/mm² |
200 |
| Max. permitted dynamic load (p) | N/mm² |
120 |
| Max. sliding speed (U) | m/s |
1,0 |
| Max. pU-value at p = 100 N/mm² | N/mm² x m/s |
0,5 |
| Max. pU-value at U = 1 m/s | N/mm² x m/s |
2 |
| Friction coefficient (dep. on operating cond.en) | µ |
0,08 to 0,18 |
| Temperature range | °C |
-200 to +750 |
Tolerances
| Housing bore | H7 |
| Bush (outer-Ø) | r6/s6 |
| Bush (inner-Ø) | C7 will be D8 after installation |
| Shaft-Ø | h7 |
| Shaft hardness | hardness > 180 HB |
| Shaft surface finish | Ra 0,2 - 0,8 µm |
| Installation The recommended method for installing bushes is freeze fitting. |
Tolerances Other installation tolerances are possible provided that a safe fit in the housing and the necessary running clearance are maintained. |
|
GTC • Contact • Imprint • Trademarks |
